Question: Does Playing A Record At The Wrong Speed Damage It?

What happens if you play a 45 record at 33?

If you play the record at 45 instead of at 33, that puts the frequencies recorded on the record 45/33 times as high, which means that as far as the record is concerned the effect of the stylus is what it would be if the resonance were at 13KHz while you played it at 33..

Why do records play at different speeds?

The slower a record turns, the worse the audio sounds. Due to this, in order to provide the best sound possible, the record needs to turn faster (higher RPM). However, when a record turns faster the amount of information it can hold on a record is reduced thus having a shorter playback time.

Why is my turntable spinning too slow?

Belts can stretch to the point where they slip on the pulley, which would cause the turntable to turn too slowly. On the flipside, if particles of the belt have worn off and have gunked up the motor pulley, your turntable will rotate too rapidly due to an increased effective diameter.

Do all record players play all records?

All record players do not play every single size of vinyl record. All record players will play the two most common sizes of vinyl record, those being 12-inch and 7-inch, but it is far less likely they will be able to play a 10-inch record.

Does playing a record backwards damage it?

Playing records backwards won’t damage the vinyl, but if your deck and stylus aren’t set up for it, you’ll damage them. … Because the needle is moving much faster in the groove it’s more likely to jump and skip, potentially scratching your records. Backwards is also dangerous. Most cartridges hold the needle at an angle.

Can you skip songs on vinyl?

Well… it’s not a CD player so there isn’t a button to skip to the next song. However, you’re able to manually lift up the needle and move it to the next song. Vinyl records don’t require you play them from beginning to end but there’s a manual process involved if you want to skip around.

Are most vinyl 33 or 45?

Vinyl records are produced to be played at one of three speeds: 33 1/3 RPM, 45 RPM, and 78 RPM. You will almost never deal with 78 RPM records, so don’t worry about that. Most full-size 12-inch records will be 33 1/3 RPM, though some — mainly EPs and maxi-singles — will be at 45 RPM.

Why are my records playing slow?

A belt can stretch out to the point where it can slip off the pulley. This can cause the turntable to move too slowly. On the other hand, if belt particles have worn off and gunked up the pulley, an increased effective diameter will cause the turntable to rotate too rapidly.

At what temperature do Records warp?

140°FA typical vinyl record can start warping due to heat at a temperature of 140°F (60°C) and can melt at temperatures exceeding 212°F (100°C). Other factors, such as humidity, sunlight exposure, and improper storage, can drastically impact the resilience of a record.

Do records really sound better?

Vinyl Sounds Better Vinyl sounds better than MP3s ever could. Most of the music is broadcast in some lossy format, where details are missed, and the overall quality is reduced. … Vinyl is far more high-quality. No audio data is lost when pressing a record.

How do you tell if a record is a 33 or 45?

You can usually tell if a record is a 33 RPM or 45 RPM by looking at the label. A 78 will not be made of vinyl. You’re not going to run into 78s unless you seek them out, so don’t even worry about them. These objects, BTW, whether made of vinyl, shellac, or other plastics, are called records.

What is better 33 or 45 rpm?

Vinyl records sound better if they are cut at higher speeds. The higher the rpm, the faster the vinyl passes under the playback stylus. This means that for each second of playback more sound information goes from the stylus to your speakers at 45rpm than 33rpm.

How do you know what speed your record is?

All records are measured and sorted by their RPM, which stands for revolutions per minute. This metric refers to how many times the platter, and therefore the record, will spin completely in one minute. There are only three speeds in which a vinyl record can be produced: 33 1/3 RPM.

What is the most common record size?

The most common sizes are seven, 10, and 12 inches in diameter, but size isn’t the only way to identify what kind of vinyl record you have. A better way to group these discs and tell them apart is the speed (in revolutions per minute, or RPM) at which they spin while playing on a turntable.

How do I fix my record player speed?

Some turntables with have speed adjustment screws – check your owners manual to find out where. Usually, turning these screws clockwise with speed up the platter and anti-clockwise will slow it down. Once you’ve amended the screws, test again with a strobe disc or phone app until you get the speed you desire.

Can you fix a warped record?

Warped vinyl can lead to a wobbly sounding rendition of your favorite song. Fortunately, warped records can often be fixed, so you can be back to rockin’ and rollin’ in no time. You’ll need two sheets of glass larger than your album, but small enough to fit in your oven. Heavier or thicker glass tends to work best.

Why do records play at 33 rpm?

The original acceptance of 33 1/3 by RCA in 1931 was a compromise between sound quality – the slower the rotation, the poorer the sounds quality – and quantity of recording time. The original microgroove could hold 23 minutes of recorded music. This was a huge increase from the 5 minutes per side of the 78.

What does a warped record look like?

You will be looking at the outside edge of the LP so it looks like a thin black line. You should notice on warped records that it is fatter somewhere because of the bow or warp in the record. If a record looks straight, move your hands a quarter turn around the edge and repeat.