Quick Answer: Can You Put A Higher Load Rating TYRE On Your Car?

Can I use a TYRE with a lower load rating?

Should I pick a higher or lower load rating.

The load rating is an important component of a tyre and as such we do not recommend moving to a lower load rating.

In some cases your insurance can be rendered null and void if you select a load rating lower than is specified for your vehicle..

Do tires with higher load rating last longer?

A tire with a Treadwear rating of 150, for example, can be expected to last about 1.5 times as long as a tire with a Treadwear rating of 100.

Should I change all 4 tires?

Some manufacturers of all-wheel-drive vehicles recommend that all four tires be replaced, not just one or two, because a new tire will have a larger overall diameter than the other tires. … The best approach, though, is to replace all four if the tread on the old tires is significantly worn.

What does 120 load index mean on tires?

For example, a light truck tire with a load index of 120/116 means a load capacity for a single tire of 3,086 pounds and a load capacity of 2,756 pounds for two tires. The reason the capacity for two tires is lower than a single tire is to make sure that the vehicle can continue to carry the load should one tire fail.

What is an H rating on a tire?

If you recall from earlier, the “H” speed rating doesn’t appear after “G” but between “U” and “V.” It represents a maximum speed of 130 mph (210 kph) and is commonly found on sports sedans and coupes.

What is Max load on tires?

A tire’s maximum load is the most weight the tire is designed to carry. “Higher” load ranges are used to identify tires that have a stronger internal construction, and therefore can hold more air pressure and carry more weight. …

Can you have tires with different load index?

Can I mount tires with a different load capacity? You can only mount a tire of equivalent load or higher load than indicated for your vehicle. The higher the tire’s load index number, the greater its load carrying capacity.

Is load rating important for a tire?

A tire load index tells you how much weight a tire can carry at its maximum air pressure. … If you’re thinking about up-sizing, you can switch to a tire with a higher load index, because that means your tire will safely be able to carry more weight. But you can never go down.

Do XL tires ride rough?

The XL tires have a stiffer sidewall and will ride a bit more ‘rough’. Probably will respond quicker too as they have stiffer sidewalls.

Do all 4 tires need to be the same brand?

The short answer is that, in general, manufacturers do not recommend tire mixing at all. … That means having the same brand, size, tread pattern, load index, and speed rating on the front and rear tires. However, there are exceptions that can lead to mixing tire brands.

Should I get H or T rated tires?

H rated tires have stronger construction than T rated tires. The concern may not be speed although a Subaru can exceed 118 MPH hence those tires however it may be load rating of the tires. Lessor speed rated tires must be able to handle the listed load of your vehicle properly. Confirm this, a good tire shop will.

Do XL Tyres last longer?

When an XL tyre is run at the pressure recommended by the vehicle manufacturer, it will last longer. These tyres are considered to have greater grip and better traction. … On the other hand, these tyres are usually slightly noisier than standard load tyres.

At what PSI will a tire explode?

about 200 psiThe standard tire is inflated to about 30 to 35 pounds per square inch. Under hot weather and highway conditions, the temperature of the air inside the tire rises about 50 degrees. That increases the pressure inside the tire about 5 psi. The burst pressure of a tire is about 200 psi.

Do all 4 tires have to match?

For all-wheel and front-wheel drive vehicles, he says all four tires must have the same tread design and be of the same make and model. … An important note to consider, Haynes says, is that if you only switch out two tires, all four tires should still have tread depths within 4/32 inches of each other.